UVLED FOR TANNING
Six Medical Product Manufacturing Applications
Uv Curing of Cardiac Stent Cannulae
Bonding of cardiac stent cannulae requires 360° light to fully illuminate the assembly. To achieve this, you can either connect a customized light delivery accessory (e.g., a curing ring) to a standard light catheter or use a multi-branch (3-4 branches) high-power fiber optic catheter to cure the cardiac stent.
Benefits: Balanced light output; minimizes warming and can be precisely controlled; no need to set output levels on multiple systems; provides 360° light; more efficient delivery reduces operating costs.
--Manufacturing and Assembly of Blood Oxygenators
Manufacturing and assembly of blood oxygenators requires a UV adhesive that cures uniformly without inducing stress cracking in the polycarbonate material. Lumen Dynamics technology offers the unique advantage of exceeding above standard UV curing to ensure optimal assembly of specialized disposable medical device oxygenators with controlled, even and repeatable curing. Lumen Dynamics is the leading UV spot curing system for medical device assembly where life depends on a repeatable curing process.
Benefits: Ensures constant illumination levels for a controlled, even and repeatable curing process; Ideal for automated and high-speed assembly environments; 400-500nm filter for controlled curing without heating the polycarbonate sheet; Flexible and easy to connect to automated systems. The adhesive is fully cured along its length for a strong, tight seal between them.
--Needle sleeve assembly
Many devices contain needles or cannulae with syringes, hypodermic and angiographic needles, endovenous devices and lancets. The connection point is very small, cylindrical, and usually connects a stainless steel cannula to a plastic sleeve. The connection point must be tightly sealed to avoid leakage of fluids such as blood or drugs, and the position of the cannula must remain fixed.
Benefits: Ensures repeatable production process; minimizes warming and can be precisely controlled; output levels can be set wirelessly on multiple systems; provides 360° illumination; more efficient transfer reduces operating costs; this curing system can be easily integrated into automated systems, minimizing development time.
--Conveyor Tubing and Fitting Assembly
The bonding of tubing and fittings needs to be precise and repeatable to ensure that there is no leakage when transferring fluids to or from the body.
Benefits: Ensures repeatable manufacturing process; minimizes warming and can be precisely controlled; output levels can be set wirelessly on multiple systems; provides 360° illumination; more efficient delivery can reduce operating costs.
--Insulin Pen Uv Light Curing Bonding
Light-curing adhesives are commonly used in the assembly of needles and syringes to provide a high tensile strength bond and to seal these critical joints. UV spot curing systems have traditionally been used to provide a quick “bond” of the adhesive, keeping the needle aligned as it moves down the line. Large area UV curing systems are used to fully cure the adhesive.
Benefits: Ensures constant light intensity for a repeatable cure process with strong and consistent bonds; minimizes warming, can be precisely controlled, and output levels can be set wirelessly on multiple systems; ensures uniform curing of the adhesive so that the needle stays aligned and allows the light to be focused only on the needle junction so that the drug is not exposed to UV light.
--UV adhesive curing for endoscopes
UV curing technology is used in the production and repair of endoscopes. UV adhesives are used to bond optical components and sometimes prisms at the end of endoscopes. For endoscope repair, both the optics and the endoscope housing with a special medical flex coating can be repaired.
Benefits: Provides the light intensity needed for endoscope repair; maintains optimal operating conditions, stable lamp output, extends lamp life, and accrues lamp life; extends lamp life; enables precise output control; ease of use ensures repeatable process.









