Leave Your Message
Company News style — reference: "UV LED Mosquito Lamp Tube Color Customer Guide"
News

Company News style — reference: "UV LED Mosquito Lamp Tube Color Customer Guide"

2026-08-28

1. Why Wavelength Matters More Than Power

In visible lighting, engineers tend to think in terms of brightness: more power means a better image. SWIR is different. The signal your sensor reads is not the light you emit — it is the light the target absorbs. A powerful LED at the wrong wavelength produces strong illumination that the target ignores; a modest LED at the right wavelength produces a measurable change in the reflected or transmitted signal.

Three facts govern every SWIR design:

  • Absorption is wavelength-specific. Water, alcohol, glucose, and lactic acid each absorb at characteristic bands between 1,000nm and 2,000nm. Illuminating outside those bands is wasted energy.
  • The emission band must overlap the absorption band. The LED's peak emission should sit inside — or as close as possible to — the target's absorption window.
  • One LED, one target. A single SWIR LED has a narrow emission band. If you need to measure multiple substances, plan for multiple wavelengths — either separate emitters or a sequencing approach.

2. Reading the Absorption Fingerprint

The table below maps the absorption spectrum of four common measurement targets to the wavelength windows your light source should cover:

Target substance Absorption spectrum (1,000–2,000nm) Typical application
Water 1,050nm, 1,400–1,650nm Moisture measurement sensor
Alcohol 1,050nm, 1,300–1,500nm Alcohol measurement sensor
Glucose 1,050nm, 1,400–1,650nm Non-invasive glucose measurement sensor
Lactic acid 1,050nm, 1,750nm Medical / biometric monitoring

Rule of thumb: identify your target, look up its absorption bands, and select the SWIR LED whose peak wavelength falls within the strongest band — not the one that is cheapest or brightest.

3. Choosing the Package: What Each Option Costs You

Tianhui's SWIR LED series offers four standard configurations. Each trades beam characteristics against integration ease:

Model Package & optics Power class Viewing angle Best-fit scenario
TH-SWIRXXXXT0.1WTD14-3528F 3528 SMD, flat 0.1W 120° Compact sensors, proximity measurement, battery-powered portable devices
TH-SWIRXXXXT1WTD42-3939H 3939, dome lens 1W 120° High-output illumination, wide-area inspection
TH-SWIRXXXXT1WTD42-3939H-60 3939, dome lens 1W 60° Long-distance or narrow-beam imaging, fog/haze penetration
TH-SWIRXXXXT1WTD42-3838F 3838, flat lens 1W 60° High-power flat-package designs, dense PCB integration

Three selection rules:

  • Wide beam (120°) for proximity and coverage. Sensors mounted close to the target — moisture probes, liquid cells, compact inspection heads — benefit from even illumination over a large area.
  • Narrow beam (60°) for distance and penetration. When the light must travel — through haze, smoke, or across a sorting line — a tighter beam concentrates the energy where the camera is looking.
  • Dome vs. flat lens is a mechanical decision, not a performance one. Dome-lens packages simplify beam shaping for narrow angles; flat packages are easier to integrate into dense PCB layouts. Choose based on your optical and assembly constraints.

4. Power Class: What the 0.1W and 1W Numbers Actually Mean

Parameter 0.1W series (3528F) 1W series (3939H / 3838F)
Forward current 20–100mA 100–1,000mA
Forward voltage 0.8–1.4V 0.7–1.4V
Radiant power @ 1,150–1,350nm 2–6mW @ 20mA 20–40mW @ 100mA
Radiant power @ 1,450nm 2–5mW @ 20mA 10–30mW @ 100mA
Radiant power @ 1,550nm 2–4mW @ 20mA 10–30mW @ 100mA
Radiant power @ 1,650–1,750nm 1–3mW @ 20mA 5–20mW @ 100mA
Thermal resistance (junction to solder point) — 10°C/W
Max LED junction temperature — 105°C

Reading guide: the 1W series delivers roughly ten times the radiant power of the 0.1W series and is the right choice for line-scan, sorting, and long-distance imaging. The 0.1W series suits battery-powered and space-constrained designs where milliwatt-level signals are sufficient. If the application runs continuous high current, confirm your thermal management — junction temperature is limited to 105°C and thermal resistance from junction to solder point is 10°C/W.

5. Common Selection Mistakes (and How to Avoid Them)

Mistake 1: Choosing wavelength by availability instead of absorption. Picking the LED off the shelf instead of the wavelength the target absorbs is the single most common cause of failed SWIR designs. Solution: define the absorption band first, then match the LED.

Mistake 2: Confusing visible brightness with infrared output. A 1,050nm emitter looks nearly invisible to the eye; that does not mean it is weak. Judge SWIR LEDs by radiant power (mW) at the specified wavelength, not by appearance.

Mistake 3: Assuming one LED covers all targets. A single narrow-band emitter measures one substance well. Multi-substance systems need multiple wavelengths, planned from the start.

Mistake 4: Ignoring the beam angle. A 120° emitter used at long range spreads the energy too thin; a 60° emitter used in a proximity cell may create hot spots. Match the beam to the working distance.

Mistake 5: Forgetting the environment. Fog, smoke, and hot surfaces affect SWIR propagation and detector response. Test in your actual operating conditions — never assume laboratory performance transfers directly to the production floor.

6. Frequently Asked Questions

Q1: What is the usable wavelength range of Tianhui's SWIR LEDs? Peak wavelengths from 1,100nm to 1,900nm across the portfolio: the 0.1W 3528 series covers up to 1,900nm, while the 1W series covers 1,100–1,800nm.

Q2: Which wavelength should I use for moisture measurement? Water absorbs strongly at 1,400–1,650nm (with a secondary band at 1,050nm). A 1,450nm or 1,550nm emitter is the typical starting point for moisture sensors.

Q3: Can the same LED measure water and glucose? Both share bands around 1,400–1,650nm, so a single wavelength can serve both in some designs — but cross-interference must be evaluated. For reliable multi-target measurement, plan separate wavelengths.

Q4: 120° or 60° viewing angle — which do I need? Proximity and wide-area illumination favor 120°; long-distance, narrow-field, and haze/smoke penetration favor 60°. Define your working distance before choosing.

Q5: Does Tianhui support custom wavelengths and packages? Yes. Tianhui's nine-step custom process covers demand analysis, R&D, prototyping, sample testing, mass production, and quality inspection. Share your target substance, measurement geometry, and environment — the engineering team will recommend or develop the right emitter.

Q6: What certifications do the SWIR LEDs carry? The series complies with RoHS, CE, FCC, UL, REACH, KC and UKCA under ISO 9001:2015 quality management, with photobiological safety verified by KTR test reports.

Turn the Wavelength Question Into a Design Advantage

The wavelength decision is not a detail — it is the foundation of every SWIR measurement. A customer who understands why their emitter must match the absorption fingerprint will design better systems, fail fewer prototypes, and remember who helped them get it right the first time. That is the difference between selling a component and building a partnership.

For wavelength selection support, spectrum comparison data, or a custom SWIR LED design, contact the Tianhui engineering team — 23+ years of LED manufacturing experience, 10,000+ solutions delivered, and a nine-step process designed to take your product from requirement to delivery.